Add/Del/Blank; Setting Add/Delete/Blank - Zenith Presentation H27E44DT Installation & Operating Manual

Setting Add/Delete/Blank

Fine-tune the channel selection list
1
Press MENU on the remote repeatedly until the Setup menu
appears.
2
Press the UP arrow repeatedly to highlight the
Add/Del/Blnk option.
3
Using either the NUMBER keypad and ENTER or the Channel
Up/Down arrows on the remote, select a channel. (If
adding a deleted channel, you will need to use the
NUMBER keypad and ENTER.)
4
Using the Right or Left arrow, choose whether the channel
is Added, Deleted, or Blanked.
5
To continue, select another channel and repeat Step 4.
When you are finished, press ENTER to remove menu.
If you delete a channel, it isn't gone for good. Just select it
using the NUMBER keypad on the remote, or add it later.
Mini glossary
ADD Adds new channels to the list that the user can scroll through using Channel Up/Down.
DELETE Removes channels for one reason or another from the channel scan list available using Channel Up/Down.
BLANK Deletes the video but retains the audio, if present on a channel.
206-3678
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
PRG
CABLE VCR
FLASHBK
SURF
CHANNEL
VOLUME
CHANNEL
1 2
5
4
3
7 8
0
ENTER
2
MENU
1
4
RECORD PAUSE TIMER
PLAY
REWIND
STOP
CH 44 ADDED
POWER
AUX TV
MUTE
3
VOLUME
3
3
6
9
3/5
QUIT
TV/VCR
SOURCE
FFWD
P A G E 2 1