Features To Your Preference Setup Menu (Start With Page 23, Auto Program) Add/Del/Blank; Setting Add/Delete/Blank - Zenith Presentation H25D46DT Operating Manual & Warranty

Setting Add/Delete/Blank

Fine-tune the channel selection list
1
Press MENU on the remote repeatedly until the Setup menu
appears.
2
Press the Up/Down arrow repeatedly to highlight the
Add/Del/Blnk option.
3
Using either the NUMBER keypad and ENTER or the
Channel Up/Down arrows on the remote, select a channel.
(If adding a deleted channel, you will need to use the
NUMBER keypad and ENTER.)
4
Using the Right or Left arrow, choose whether that chan-
nel is Added, Deleted, or Blanked.
5
To continue, select another channel and repeat Step 3.
When you are finished, press ENTER to remove menu.
Menu Operation/Front Control Panel
The menus can also be operated by using the TV front control
panel buttons. See page 22 for menu operation instructions.
If you need to key-in numbers, use the remote control.
If you delete a channel, it isn't gone for good. Just select it
using the NUMBER keypad on the remote, or add it later.
Mini glossary
ADD Adds new channels to the list that the user can scroll through when using the remote.
DELETE Removes channels for one reason or another from the list that the user can scroll through.
BLANK Removes the video and audio signal from a channel.
P A G E 2 6
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
CAPTIONS
ALARM MENU
LANGUAGE
PRG
CABLE VCR AUX
SURF FLASHBK
CHANNEL
VOLUME
CHANNEL
1 2
3
4 5
7 8
0
ENTER
2
1 MENU
2
PAUSE
RECORD TIMER
PLAY
REWIND
STOP
CH 44 ADDED
POWER
TV
MUTE
3
VOLUME
3
3
6
9
5
QUIT
4
TV/VCR
SOURCE
FFWD
206-3602