On/Off Timers - Zenith HealthView H20E50DT Installation And Operating Manual, Warranty

Setting On/Off Timers
Set up On/Off Timers
Note: On/Off Timers
operate independently of
each other.
1
On the optional HP602 Installer's remote, press MENU
repeatedly until the Setup menu appears.
2
Press SELECT repeatedly to highlight the Timer option, press
the Right arrow.
3
Use SELECT to choose an option. Use the number keypad
and/or the Left/Right ADJ arrows to enter the times. To set
PM, add 12 to the hours. For example, to set 6:00 p.m. Use
the number keypad to set 1-8-0-0. (6 for the hours and the
extra 12 for PM.) Do not use the TIMER key to set AM/PM.
4
Press ENTER to remove menu and return to TV viewing.
Your options are:
• On Time
Sets a time that the TV will turn itself On each day.
• Off Time
Sets a time that the TV will turn itself Off each day.
• On/Off Timer
Enables or disables the On/Off Timer functions. (The On/Off
Timer can be disabled but the settings will be retained.)
The clock must be set before the Timers will function.
The Off Timer can be used to turn the TV off at the preset time.
Note: No On Timer setting is required to use the Off Timer feature.
Mini glossary
TIME A four-digit figure broken down into hours and minutes, used to enter the time when setting the clock or programming timers.
HOURS First two digits that are entered when setting the clock or programming timers. (Add 12 for PM settings.)
MINUTES The last two digits that are entered when setting the clock, or programming timers.
P A G E 1 8
SETUP MENU
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
TO SET TIMER
CAPTIONS
LANGUAGE
TIMER
ON TIME 9:00 AM
OFF TIME 7:00 PM
ON/OFF TIMER ON
POWER
1 2
4 5
3
7 8
0
ENTER
1
BED 1
TIMER MENU
3
SELECT
2
ADJ
2/3
3
6
9
4
BED 2
BANK
CH PREVIEW
ADJ
206-3747