Setup Menu (Start With Page 16, Auto Program) Add/Del/Blank; Setting Add/Delete/Blank - Zenith H2546DT Installation And Operating Manual, Warranty

Setting Add/Delete/Blank

Fine-tune the channel selection list
1
Press the MENU key on the remote so the Setup menu
appears.
2
Press the UP arrow repeatedly to highlight the
Add/Del/Blnk option.
3
Using either the NUMBER keypad and ENTER or the Channel
Up/Down arrows on the remote, select a channel. (If
adding a deleted channel, you will need to use the
NUMBER keypad and ENTER.)
4
Using the Right or Left arrow, choose whether that channel
is Added, Deleted, or Blanked.
5
To continue, select another channel and repeat Step 3.
When you are finished, press ENTER to remove menu.
If you delete a channel, it isn't gone for good. Just select it
using the NUMBER keypad on the remote, or add it later.
Mini glossary
ADD Adds new channels to the list that the user can scroll through when using the remote.
DELETE Removes channels for one reason or another from the list that the user can scroll through.
BLANK Removes the video and audio signal from a channel.
P A G E 2 0
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
ALARM MENU
LANGUAGE
PRG
CABLE VCR AUX
SURF FLASHBK
CHANNEL
VOLUME
CHANNEL
1 2
3
4 5
7 8
0
ENTER
2
1 MENU
RECORD PAUSE TIMER
PLAY
REWIND
STOP
CH 44 ADDED
POWER
TV
MUTE
3
VOLUME
3
6
9
5
4
QUIT
TV/VCR
SOURCE
FFWD
206-3492-A