Clock Set - Zenith HealthView H20E50DT Installation And Operating Manual, Warranty

Clock Set

SETUP MENU
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TO SET CLOCK
TIMER
CAPTIONS
LANGUAGE
SETUP MENU
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TO SET CLOCK
TIMER
CAPTIONS
LANGUAGE
Clock Auto/Manual Operating Modes Setup
Use MENU, SELECT, and ADJ Left/Right to choose the Clock menu and to
set up the clock menu options, with the optional Installer's remote.
Clock Mode Auto: TV automatically sets the time.
Time Zone: User can choose the time zone or have the
TV set it automatically.
Day. Savings: User can choose to have daylight
savings adjust the clock time one hour, or have the TV
adjust it automatically.
Manual: User sets the time on the clock.
Use ENTER repeatedly to remove menus.
The clock can also be set using 24 hour "military time." For p.m. settings
add 1200. For example, to set 6:30 p.m., add 1200 to 630, = enter 1830.
For Auto Clock Set to work, TV must be tuned to a channel that has XDS
data available. Auto Clock Set, sets the time only once while the TV is on.
To set the clock with XDS data, turn TV off, then back on again, or set the
clock time manually.
Mini glossary
TIME A four-digit figure broken down into hours and minutes, used to enter the current time when setting the clock or wake-up alarm.
HOURS First two digits that are entered when setting the clock or the wake-up alarm.
MINUTES The last two digits that are entered when setting the clock, or the wake-up alarm.
TIMER Chooses AM or PM when setting the clock.
206-3747
CLOCK MENU
CLOCK SET
TIME ZONE
DAY. SAVINGS
PRESS SELECT TO CHOOSE
PRESS ADJ TO CHANGE
CLOCK MENU
CLOCK SET
TIME SET
PRESS SELECT TO CHOOSE
PRESS ADJ TO CHANGE
EASTERN
CENTRAL
MOUNTAIN
AUTO
PACIFIC
OFF
ON
10:43
1 2
3 4 5
7 8
0
1 ENTER
BED 2
BED 1
4
TIMER MENU
CH PREVIEW
SELECT
2
ADJ
3
AUTO
AUTO
MANUAL
AM
TIMER
3
6
9
5
BANK
ADJ
P A G E 1 7