Yamaha VP-1 Owner's Manual page 80

• If you do not want to assign a controller to a particular parameter, set the entry to
"off". The parameter will then take the value recorded for it in the element's initial
scene. ( REFERENCE: 1-14)
• You can use the
F1
currently marked by the cursor. (Refer to the next page for a description of control
range.) This function is not available for entries marked "---".
• To return to the main PLAY screen, press
• To switch to another PLAY-mode function, press
Important
• You cannot assign the same controller to more than one parameter for the same
element. If you assign an already assigned controller, the previous assignment
automatically switches to "off".
• You cannot change the controller assigned to the velocity parameter.
• You cannot assign controllers to unused parameters. You cannot assign controllers
in relation to unused elements.
• If you assign the pitch wheel to a parameter other than pitch, the wheel will
continue to control pitch while simultaneously controlling the selected parameter.
FYI
• During performance, you can use this function to view the current controller assignments.
• Markings at the upper left of the LCD indicate the direction in which scrolling is possible. A
marking indicates that you can scroll downward only;
scroll in either direction;
• Use the 1 ~ 4
buttons to toggle elements on and off.
:[Rng] function to set the control range for the entry
or
EXIT
means that you can scroll upward only.
buttons to select the element, and the
Editing Functions
.
PLAY
~ .
F5 F7
means that you can
9 ~ 12
REFERENCE
Chapter 1 PLAY Mode 1 - 11