Yamaha VP-1 Owner's Manual page 16

（13）
QUICK EDIT
EQ LOW EQ LO-MID
AT FOLLOW VEL SENS
LFO DEPTH LFO SPEED
EG ATTACK EG DECAY
QS1 QS2
（14）
(13)
(14)
(15)
(16)
(17)
(18)
EQ HI-MID EQ HIGH
POR TIME EF DEPTH
LFO DELAY LFO HOLD
EG SUSTN EG RELSE
QS3 QS4
（15）
▽C3
QUICK EDIT selectors (
Use these to select the functions to be controlled by the QUICK EDIT
sliders. ( BASICS: 3-16)
QS1, QS2, QS3, and QS4 (Quick-edit sliders)
Use these sliders for quick editing. The LEDs along the right side of each
slider indicate the slider's position. If the slider is at center position, the two
middle LEDs will be on. (
C3 key mark
Marks the position of note C3 on the keyboard. The marking is not
meaningful if the keyboard has been transposed.
Display
The LCD displays the name of the currently selected voice, together with
various status information. Characters may be displayed black-on-white or
white-on-black. (
change slightly over the course of a long session; adjust as necessary using
the CONT knob. (
F1 to F8 (Function buttons)
Use these buttons to select various functions while playing or editing. The
bottom line of the LCD indicates the currently available functions.
CONT knob
Adjusts the LCD's contrast.
（16）
F1 F2 F3 F4
（17）
and )
BASICS: 3-17)
REFERENCE: 2-13) The screen's contrast level may
REFERENCE: 2-13)
Controls and Connectors
F5 F6 F7 F8 CONT
（18）
BASICS
Chapter 1 Setting It Up
1 - 4