Yamaha VP-1 Owner's Manual page 143

LOAD BANK.
Insert the disk
DISK
Loads one bank of voice data from the floppy disk.
Destination(Int) Bank
Source(Disk) Bank
: Lbnk
F2
Bank A ~ Bank D
Bank A ~ Bank D
Description
• This operation copies one bank of voice data from the saved data on the floppy
disk.
• Destination (Int) Bank: Selects the internal bank into which data are copied. To
select, press F7 :{DST} to move the cursor to this item, then change the bank
setting as necessary. (See next page.)
• Source (File) Bank: Selects the voice bank copied from the floppy disk. If you
need to change the selection, press
then change the bank setting as necessary.
• Press EXIT or PLAY
• Press for
F1 F3
Important
• The VP1 will not perform this operation if Memory Protect (
13) is set "on".
• This operation overwrites voices currently residing in the destination bank. If you
want to retain the original voices, you must save all internal data to a different
floppy disk ( REFERENCE: 3-9) before starting the load operation.
:{SRC} to move the cursor to this item,
F8
to return to PLAY mode.
~ to change to another DISK-mode function.
F6
DISK Functions
REFERENCE: 2-
REFERENCE
Chapter 3 DISK Mode
3 - 5