Yamaha VP-1 Owner's Manual page 144

Procedure
1. Check that the appropriate filename is displayed at the top right of the
screen.
2. Select the source bank by pressing the appropriate bank button (
), rotating the dial, or pressing the
D
3. Press :{DST} to move the cursor to the "Destination (Int) Bank"
F7
entry.
4. Select the destination bank by pressing the appropriate bank button
( ~
A D
button.
5. Press .
ENTER
The screen displays the "Are you sure?" query.
6. To proceed, press
If you do not want to proceed, press
and return to the previous screen.
When you press
"Now loading!" message appears on the display. When loading is finished,
the screen displays the "Completed!" message.
7. Press .
EXIT
The VP1 returns to PLAY mode.
), rotating the dial, or pressing the
INC/YES .
or
DEC/NO
, the VP1 begins loading. After a few moments the
INC/YES
A
or button.
INC/YES DEC/NO
or
INC/YES DEC/NO
to cancel the operation
EXIT
REFERENCE
Chapter 3 DISK Mode
DISK Functions
~
3 - 6