Yamaha VP-1 Owner's Manual page 111

• Press :EF to advance to the effects-setting screen. (Refer to the next page.)
F8
• Press or
EXIT PLAY
• To switch to another PLAY-mode function, press
Important
• These settings do not affect the signals to the ELEMENT outputs.
• It is recommended that you set "Drct" to 0 when using the Stereo Flanger or Aural
Exciter sound effect (effects 22 and 29; see next page) so as to avoid phase
cancellation caused by slight phase differences between direct and effects-
processed outputs.
Aural Exciter is a registered trademark of APHEX Systems Ltd. The Aural
Exciter is manufactured under license from APHEX Systems Ltd.
FYI
• To adjust the output level to the ELEMENT jacks, use the VOICE SETUP function's
"Volume" parameter. (
• You can use the 1
12 buttons to toggle elements on and off during editing.
to return to the main PLAY-mode screen.
REFERENCE: 1-22)
~ 4 buttons to switch among elements, and the
Editing Functions
, , or
F4 F5 F6
9
REFERENCE
Chapter 1 PLAY Mode
.
~
1 - 42