Yamaha VP-1 Owner's Manual page 165

<Sending conditions>
NOTE OFF
$8n
NOTE ON
$9n
CONTROL CHANGE
$Bn,$xx
PROGRAM CHANGE
$Cn
CH'S AFTER TOUCH
$Dn
PITCH BENDER
$En
ACTIVE SENSING CLOCK
$FE
1-2 Channel Messages
1.2.1 Sending
1.2.1.1 Note ON/OFF
Transmittable note range:
Velocity range:
1.2.1.2 Control Change
Action of following controllers and data-edit functions generates corresponding MIDI data.
Ctrl#
1
2
4
7
64
65
Also: Modulation Wheel 2, Foot Controller 2, Modulation Ball, Scene Controller,
Continuous Sliders (1,2), Quick Edit Sliders (1,2,3,4). Data for these controllers is output
using control numbers assigned by the SYSTEM mode's ASSIGNABLE CONTROLLERS
function. Available control numbers are 1 ~ 31, 33 ~ 119.
1.2.1.3 Program Change
The VP1 transmits Program Change data when a new voice is selected. Voices A01 through
D16 generate Program Change numbers 0 through 63, respectively.
PROGRAM CHANGE
E0(28)...G6(103), when Transpose = 0
C-2(0)...G8(127), when Transpose is nonzero
1...127
Parameter
Modulation Wheel
Breath Controller
Foot Controller 1
Foot Volume
Sustain Switch
Poratamento Switch
<TCh>
<TCh>
<TCh>
<TCh>
<TCh>
<TCh>
Data Range
0 ~ 127
0 ~ 127
0 ~ 127
0 ~ 127
0 , 127
0 , 127
MIDI Data Format
MIDI OUT
REFERENCE
App - 15
Appendix