Yamaha VP-1 Owner's Manual page 124

4. Enter the voice name.
Enter a voice name of up to ten characters. For information about how to enter
characters, refer to the BASICS section. (
When you have finished entering the name, press
you to the previous screen.
5. Press :[Ctgry] to set a new category.
F3
(If you do not need to change the category, jump to Step 7.)
The category selection screen appears.
6. Select a category.
Move the cursor to the desired category name, then press
category and return to the original screen. Refer to the BASICS section (
BASICS: 3-21) for information about categories.
7. Press : [Notes] to enter a comment.
F5
(If you do not need to change the comment, jump to Step 9.)
The comment entry screen appears.
8. Enter a comment.
Enter a comment of up to 32 characters, then press
previous screen.
The VP1 will display a "Notes" window showing this comment whenever you
select this voice. If you do not want to display the "Notes" window for this
voice, enter a space as the first character of the comment.
9. Press ENTER .
The screen displays a message asking for confirmation.
10. Press to execute the store.
INC/YES
If you with to cancel the store, press
11. Press .
EXIT
The VP1 selects the newly stored voice as your current voice, and returns
you to the screen that was displayed just before you began the storage
procedure.
BASICS: 3-26)
. The VP1 returns
EXIT
to select the
EXIT
to return to the
EXIT
instead.
DEC/NO
REFERENCE
Chapter 1 PLAY Mode
Editing Functions
1 - 55