Yamaha VP-1 Owner's Manual page 35

Using Quick Edit
The VP1's Quick Edit capability allows you to perform simple voice editing during
performance. The procedure below introduces you to Quick Edit operation. Refer to
the next chapter for a detailed explanation about quick editing. (
Procedure
1. Press bank button
The LED above the button begins flashing.
2. Press program button
The LCD changes to the display illustrated below, indicating that the
selected voice is A02, "WaterBell".
3. Check that the top line of the Quick Edit panel (EQ LOW, EQ LO-MID,
EQ HI-MID, and EQ HIGH) is highlighted.
If a different line is highlighted, press the Quick Edit panel's
move the highlight to the top.
4. Play on the keyboard with your right hand while moving the second quick-
edit slider (QS2) up and down.
The slider does not become effective until it moves past the midpoint on the
scale. For details about how a controller becomes effective, refer to the
discussion of the Controller Hook function in the next chapter. (
14)
The highlighted EQ LO-MID above the slider tells you that the current function
of the slider is to control the gain for the low-middle range.
5. Press the button on the Quick Edit panel.
The highlight moves to the second line of the Quick Edit panel (AT
FOLLOW, VEL SENS, POR TIME, and EF DEPTH).
6. Play on the keyboard with your right hand while moving QS4 up and
down.
Once again, the slider does not become effective until it moves past the
midpoint on the scale. Because EF DEPTH is highlighted, you know that the
slider's current function is to control the effect depth.
.
A
.
2
First Try
BASICS: 3-16)
button to
BASICS: 3-
BASICS
Chapter 2 Trying It Out
2 - 6