Table of Contents
Advertisement
COMBINING TWO TRACKS
You can combine two tracks by erasing the index mark in
between.
Example
To combine the 2nd track and the 3rd track by erasing the index
mark at the beginning of the 3rd track:
1st track | 2nd track | 3rd track
1st track
|»
.2nd track:
0-9,4+10
o & DMO
NO
7 Press the MD button and load an MD.
2 Select or play back the latter track of the two
tracks to be combined
using the <<
or >>
button, the MULTI
JOG dial, or the numbered
buttons on the remote conirol.
Example:
To combine the 2nd and 3rd tracks, select or play back the
3rd track.
3 Press the MD EDIT button repeatedly so that
"Combine" is displayed.
Example:
When combining the 2nd and 3rd tracks
ES
4 Within 10 seconds, press the ENTER button.
The two tracks are combined.
The track numbers from this point forward are decreased by
1.
5 Remove the MD from the unit.
"TOC EDIT" is displayed and the data concerning the contents
of the editing are registered.
* If both of the tracks are titled, the title of the lower numbered
track remains.
If only one track is titled on the tracks to be
combined, this title remains.
* You cannot combine a track recorded in monaural and a track
recorded in stereo.
29 ENGLISH
CHANGING THE ORDER OF THE
TRACKS
You can change the order of tracks after completing a recording.
Example
To move the 3rd track to the 1st position
1sttrack
2ndirack
3rd track
1 Press the MD button and load an MD.
2 Select or play back the track to be moved using
the MULTI JOG dial or the numbered buttons on
the remote control.
3 Press the MD EDIT button repeatedly so that
"Move" is displayed.
Example:
When moving the 3rd track
4 Within 10 seconds, press the ENTER button.
5 Turn the MULTI JOG dial to select the desired
track number to move the track to.
Example:
When moving to the 1st position
6 Within 10 seconds, press the ENTER button.
7 Remove the MD from the unit.
"TOC EDIT" is displayed and the data concerning the contents
of the editing are registered.
Advertisement
Table of Contents
