Table of Contents
Advertisement
MD GUIDE MESSAGES
Message
Blank Disc
Can't Edit
Cause
Nothing is recorded on the disc.
Tracks are too short to be joined up.
Solution
The combine function was used while playing
back the first track.
The divide function is used at the beginning of the
track.
The combine function was used to join a track
recorded in monaural with a track recorded in
stereo.
Disc Error
The disc is damaged by scratches.
The unit received a strong shock during a TOC
reading.
Disabled.
Replace the disc.
Do not subject the disc to strong shock during a
TOC reading.
Disc Full
Temp Over
PB Disc
Protected
TOC Full
Mecha Err
MD Error
UTOC Error
35 ENGLISH
There are not enough time to record remaining on
the disc.
The temperature of the unit is too high.
Replace the disc with another recordable disc.
Leave the unit in a cool place for a while before
operating it again.
The surrounding temperature is too high or too
low.
A prerecorded disc is attempted to edit.
The disc is record-protected.
There are too many tracks or emphasis data to be
recorded or edited, or there is no room on the
disc.
Error occurs in the loading mechanism.
(All functions will be disabled.)
An error occurred in the MD unit of this unit.
An error occurred in the TOC of the MD because
the unit was subjected to a strong shock during
recording, or during recording or reading of the
TOC.
:
Operate the unit at moderate room temperature.
Replace the disc with a recordable one.
Slide the record-protect tab on the disc. (See page
21.)
Erase tracks.
Turn the power off and disconnect the AC cord
once. Then turn it on again.
If this message still appears, consult your local
Aiwa dealer.
Contact an Aiwa service representative.
Exchange the MD.
Do not subject the unit to strong shocks during
recording, or during recording or reading of the
TOC.
Advertisement
Table of Contents
