Table of Contents
Advertisement
PROGRAMMED RECORDING OF
CDS
Up to 30 tracks can be programmed and recorded on an MD.
1
MD DISPLAY
3
7
To check the recordable time of the MD
Press one of the function buttons other than MD and load an
MD. Then press the MD DISPLAY button.
The recordable time on the MD is displayed.
71 Load a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
Direction guide
2 Press the CD button.
3 Load the CD to be recorded.
4 Press the PRGM button while pressing the SHIFT
button on the remote control.
"PRGM" flashes on the display.
5 Press the numbered button and the +10 button @
to program a track to record.
Example:
To select the 12th track, press the +10 and 2 buttons.
To select the 20th track, press the +10, +10 and 0 buttons.
Selected track number
Program number
Total number of
Total playing time of
selected tracks
the selected tracks
6 Repeat step 5 to program other tracks.
7 Press the CD ® MD SYNCHRO
REC button to
start recording.
Recording begins.
When the programmed tracks finish playing, the recording
stops automatically.
Then "TOC EDIT" is displayed and the contents (TOC) of the
recording are recorded to the MD.
To stop recording halfway
Press the Ml button. Recording to the MD stops, and the contents
(TOC) of the recording are recorded on the MD.
To stop play of the CD, press the Il button again.
To record on a previously recorded MD
If there is an unrecorded section left on the MD, the new recording
automatically starts from where the previous recording finished.
If you want to start recording from the beginning of a previously
recorded MD, erase the previous recording completely.
(See
page 30.)
To change the display during recording
Press the MD DISPLAY button. With each press of the button,
the display changes in the following order.
@
Track number and elapsed time of CD
[
(Example:
CD
1Tr
1:23)
@ Recordable time on MD
(Example:
MD
—36:15)
ENGLISH 24
Advertisement
Table of Contents
