Radio Reception; Presetting Stations - Aiwa XR-MD85 Operating Instructions Manual

RADIO RECEPTION
PRESETTING STATIONS
The unit can store a total of 32 preset stations. (Each band has
a maximum of 20 available preset stations.) Presetting allows
you to tune in to a station directly. Stations are assigned preset
numbers, beginning from 1 in consecutive order for each band
(FM, MW and LW).
Automatic presetting:
This unit has a function for reception of RDS" (Radio Data
System) and other stations.
FM RDS stations take priority over other FM stations if there are
more than 20 receivable stations.
Manual presetting:
You can select stations to be preset from all the bands.
PRESETTING AUTOMATICALLY
The tuner scans through the receivable frequency range and
stores stations automatically.
7 Press the TUNER/BAND button.
An FM station is displayed.
2 Keep the DEMO/RDS button pressed for 4
seconds until "AUTO PRESET" runs through the
display.
The ll button flashes for 4 seconds.
3 Press the Ill button while it flashes.
The tuner searches for a station, beginning with the FM band.
When a tuned stations is stored, the selected preset number
flashes on the display.
The search continues on the MW and LW bands as long as
the preset numbers are available.
7 ENGLISH
NOTE]
When presetting stations automatically, the same RDS stations
on other frequencies may be stored. In this case, clear the preset
station with weaker signals.
PRESETTING MANUALLY
7 Press the TUNER/BAND button repeatedly to
select the band.
eee sige
2 Press the << or > button to select a station.
Each time the button is pressed, the frequency changes.
@ When tuning in to an FM RDS station
After TUNE or the display goes out, the Program Service
station name (PS') is displayed and RDS lights up.
Won) :
RDS
© When tuning in to other stations
After TUNE on the display goes out, the band is displayed.
The Program Service station
name (PS)
* During FM stereo reception, ((t@1)} lights.
3 Press the Il button to store the station.
The assigned preset number flashes.
4 Repeat steps 1 to 3 to store the stations.
The next station will not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations for one band
have already been stored.
To search for a station quickly (Auto Search)
Keep the <4 or PP button pressed until the tuner starts
searching for a station. After tuning in to a station, the search
stops.
To stop the Auto Search manually, press the << or > button.
* The Auto Search may not stop at stations with very weak
signals.