Table of Contents
Advertisement
MD EDITING
You can register the titles of the discs and tracks.
MULTI JOG
ENTER
MD MODE
To register a track title, select a track to register
the title using the << or >
button, the MULTI
JOG dial, or the numbered buttons on the remote
control. Then press the MD MODE button.
"Title?" is displayed for 10 seconds.
Example: When registering a title for the 3rd track
27 ENGLISH
5 Turn the MULTI JOG dial to select a desired
character, then press the >
button.
When you press the >
button, the selected character moves
one column to the left.
6 Repeat steps 4 and 5 to enter all the required
characters (up to 50 characters).
If you leave the unit without performing any operation for one
minute in steps 4 and 5, the character entry mode will be
cancelled.
If this happens, repeat from step 2.
7 Press the ENTER button.
8 Remove the MD from the unit.
"TOC EDIT" is displayed and the entered title is registered.
7 V
=
NS
¢
To change a character
Press the <<
or >
button repeatedly until the character to
be changed flashes. Then enter the desired character again.
To delete characters
Press the <<
or ®® button repeatedly until the character to
be deleted flashes. Then press the UI button.
To insert a space between the characters
Press the <4
or >
button repeatedly until the part to be
entered as a space flashes. Then press the <4 button.
To add a character between two characters
First, insert a space between two characters as described above.
Then change the space to the desired character by entering it.
+ A title cannot be registered in the following cases:
~—During random play or programmed play
Advertisement
Table of Contents
