Combining Two Tracks; Changing The Order Of The Trackg - Aiwa XR-M99 Operating Instructions Manual

COMBINING TWO TRACKS
You can combine two tracks by erasing the index mark in between.
Example
To combine the 2nd track and the 3rd track by erasing the index
mark at the beginning of the 3rd track:
1st track
FUNCTION
UP/DOWN
0-9,+10
ENTER/
ILLUMINATION
FUNCTION
<< >>
<< >>
MD EDIT
7 Press the FUNCTION UP or DOWN button on the
Stereo Integrated Amplifier or the FUNCTION
button on the remote control repeatedly so that
"MD" appears, then load an MD.
2 Select or play back the latter track of the two
tracks to be combined using the << or >>
button, or the numbered buttons on the remote
control.
Example:
To combine the 2nd and 3rd tracks, select or play back the
3rd track.
3 Press the MD EDIT button repeatedly so that
"Combine" is displayed.
Example:
When combining the 2nd and 3rd tracks
i
4 Within 10 seconds,
ILLUMINATION button.
The two tracks are combined.
The track numbers from this point forward are decreased by
1.
press the ENTER/
5 Remove the MD from the Mini Disc Recorder.
"TOC EDIT" is displayed and the data concerning the contents
of the editing are registered.
* If both of the tracks are titled, the title of the lower numbered
track remains. If only one track is titled on the tracks to be
combined, this title remains.
« You cannot combine a track recorded in monaural and a track
recorded in stereo.
32 ENGLISH
CHANGING THE ORDER OF THE
TRACKS
You can change the order of tracks after completing a recording.
Example
To move the 3rd track to the 1st position
1sttrack 2ndtrack 3rd track
VOLUME/
MULTI JOG
FUNCTION
ENTER
71 Press the FUNCTION UP or DOWN button on the
Stereo Integrated Amplifier or the FUNCTION
button on the remote control repeatedly so that
"MD" appears, then load an MD.
2 Select or play back the track to be moved using
the << or > button, or the numbered buttons
on the remote control.
3 Press the MD EDIT button repeatedly so that
"Move" is displayed.
Example:
When moving the 3rd track
il I —
4 Within 10 seconds, press the ENTER/
ILLUMINATION button.
5 Turn the VOLUME/MULTI JOG dial to select the
desired track number to move the track to.
Example:
When moving to the 1st position
U
6 Within 10 seconds,
ILLUMINATION bution.
7 Remove the MD from the Mini Disc Recorder.
"TOC EDIT' is displayed and the data concerning the contents
of the editing are registered.
press the ENTER/