Table of Contents
Advertisement
Safely transporting children in the vehicle
72
1
ISOFIX mounting bracket
Before every journey, make sure that the ISOFIX/
LATCH child restraint system is engaged correctly
in both mounting brackets in the vehicle.
* NOTE Damage to the seat belt for the cen-
ter seat during installation of the child
restraint system
Make sure that the seat belt is not trap-
#
ped.
Remove and stow away the respective covers
#
of the ISOFIX mounting brackets 1.
Attach the ISOFIX/LATCH child restraint sys-
#
tem to both mounting brackets in the vehicle.
After removing the child seat, replace the
#
cover of the LATCH-type (ISOFIX) mounting
brackets 1.
Fastening a Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests after
#
installing Top Tether belts.
Observe the lock verification indicator.
#
If the rear seat backrest is not engaged and
locked in place, the red lock verification indicator
will be visible.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX (left
and right rear seats) or the seat belt (all
rear seats) and the vehicle.
Advertisement
Table of Contents
