Table of Contents
Advertisement
Only use the cup holder when the vehicle
#
is stationary.
Only use the cup holder for containers of
#
the right size.
Close the container, particularly if the
#
liquid is hot.
& WARNING Risk of injury due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open storage spaces and mobile
phone brackets cannot always retain all
objects they contain.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
Always stow objects in such a way that
#
they cannot be thrown around in such
situations.
Always make sure that objects do not
#
protrude from storage spaces, parcel
nets or storage nets.
Close the lockable storage spaces before
#
starting a journey.
Always stow and secure heavy, hard,
#
pointed, sharp-edged, fragile or bulky
objects in the trunk.
Requirements:
For installation: the locking catch is pushed in
R
the direction of the cup holder.
Observe the notes on loading the vehicle
(
page 124).
/
Seats and stowing 137
Installing
Insert cup holder housing
1
into the stowage
#
compartment at a slight angle.
Place cup holder housing
1
in the stowage
#
compartment, aligning the recesses with the
two hubs
2
so that they fit.
Push the cup holder down.
#
Advertisement
Table of Contents
