Table of Contents
Advertisement
Push the new wiper blade into the wiper arm
#
in the direction of arrow
1
until release knob
2
engages.
Make sure that the wiper blade is seated cor-
#
rectly.
Fold the wiper arms back onto the windshield.
#
Switch on the vehicle.
#
Press the î button on the combination
#
switch.
The wiper arms will return to their original
positions.
Switch off the vehicle.
#
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Maintenance display
There is a maintenance display at the tip of the
newly mounted wiper blade.
Remove protective film
1
from the mainte-
#
nance display.
When the color of the maintenance display
changes from black to yellow, the wiper blades
should be replaced.
Light and visibility 159
Replacing the rear window wiper blade
& WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windshield wipers
#
and vehicle before changing the wiper
blades.
Advertisement
Table of Contents
