Table of Contents
Advertisement
* NOTE Damage to the vehicle from secur-
ing it incorrectly
After loading, the vehicle must be
#
secured on all four wheels. Otherwise,
the vehicle could be damaged.
A minimum distance of 8 in (20 cm)
#
upwards and 4 in (10 cm) downwards
must be kept to the transport platform.
Secure the vehicle on all four wheels after
#
loading.
Unloading the vehicle
Vehicles with AIRMATIC
Make sure that the vehicle is raised to trans-
#
port level before unloading (
page 271).
/
Lowering the vehicle after unloading
Switch on the power supply.
#
Switch on the vehicle.
#
In Transport Settings, swipe up to select the
#
Standard Level
and press a.
The vehicle is adjusted to the height of the last
active level and the
Lowering Vehicle...
sage is displayed.
After the vehicle has been lowered, press the
#
G button for at least two seconds.
Transport Settings closes.
Towing eye storage location
Towing eye
1
is located under the cargo floor.
Breakdown assistance 405
Installing and removing the towing eye
mes-
Press cover
1
inwards and remove it.
#
Screw in the towing eye clockwise as far as it
#
will go and tighten.
Advertisement
Table of Contents
