Table of Contents
Advertisement
146 Light and visibility
▌Automatic driving lights function
When the vehicle is switched on, the side lamps,
low beam and daytime running lights will be
switched on automatically depending on the ambi-
ent light.
& WARNING Risk of accident when the low
beam is switched off in poor visibility
When the light switch is set to Ã, the low
beam may not be switched on automatically if
there is fog, snow or other causes of poor visi-
bility such as spray.
In such cases, turn the light switch to
#
L.
The automatic driving lights are only an aid. You
are responsible for the vehicle lighting.
▌Switching the rear fog light on/off
Requirements
The light switch is in the L or à posi-
R
tion.
Press button R.
#
Please observe the country-specific laws on the
use of rear fog lamps.
Operating the combination switch for the lights
1
High beam
2
Turn signal light, right
3
Headlamp flashing
4
Turn signal light, left
Use the combination switch to select the
#
desired function.
Switching on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch in the direction
#
of arrow 1.
When high beam is activated, the indicator
lamp for low beam L will be deactivated
and replaced by the indicator lamp for high
beam K.
Switching off high beam
Push the combination switch in the direction
#
of arrow
1
or pull it in the direction of arrow
3.
Headlamp flashing
Pull the combination switch in the direction of
#
arrow 3.
Advertisement
Table of Contents
