Table of Contents
Advertisement
Editing tracks and recordings
Select ß
Tracks
.
#
Select the desired track.
#
Select options u for the desired track.
#
Select
Rename
or Delete.
#
or
Select a track.
#
Highlight the desired recording.
#
Select u options.
#
Select
Export to...
or Delete.
#
Setting Drag Race
Multimedia system:
TRACK PACE
Drag Race
4
5
Measuring acceleration
Select Z
Drag race
options.
#
Select Acceleration.
#
Set a starting speed or select Automatic.
#
Measurement begins as soon as the specified
starting speed has been reached.
Set a target speed.
#
Measurement stops as soon as the specified
target speed has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
Select Z
Drag race
options.
#
Select
Quarter
Mile.
#
Set a target distance.
#
Measurement stops as soon as the specified
target distance has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been traveled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
MBUX multimedia system 339
Measuring braking
Z
Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start off and begin the measurement.
#
Brake to a stop.
#
Measurement is incremental, in steps of
6 mph (10 km/h) to a stop. If the braking pro-
cedure is started e.g. at a speed of 98 mph
(157 km/h), measurement starts as soon as
93 mph (150 km/h ) has been reached
Storing and calling up measured values
If measurement is completed or canceled, a
prompt appears asking whether the measurement
should be saved.
Confirm the prompt with
OK
to save.
#
Calling up saved measurements
± Select History.
#
Select Acceleration,
Quarter Mile
#
Select a measurement.
#
The desired measurement is displayed in
detail.
or Braking.
Advertisement
Table of Contents
