Table of Contents
Advertisement
434 Wheels and tires
Remove the cover.
#
Cover of the jack support points
To install: insert tabs
3
of the cover into the
#
recesses of the longitudinal member panel
and press the covers closed.
Insert retaining clip
1
into the cover, as
#
shown in the illustration, until you hear it
engage in the floor bush.
Make sure that the floor bush in the vehicle is
correctly aligned to the cover.
* NOTE Damage to the vehicle due to using
an unsuitable jack
You can damage the vehicle and, in particular,
the high-voltage battery if you use a jack that
is not specifically designed for the jack sup-
port points of the vehicle.
Only use jacks that are specifically
#
designed for the jack support points, or
use an appropriate adapter.
* NOTE Risk of damage to the vehicle due
to incorrect positioning of the jack
If you do not position the jack at the designa-
ted jack support points, you could damage
your vehicle and, in particular, the high-voltage
battery.
Only position the jack at the designated
#
jack support points.
Take the ratchet out of the tire-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
Advertisement
Table of Contents
