Yaesu VR-500 Operating Manual page 7

[ • ( STEP )]
Input of the "Decimal
Point" frequency entry
digit (" • ").
Select the synthesizer
steps to be used
during VFO operation.
None
[ 0 ( MODE )]
Frequency Entry
Digit "0"
Select the operating
(receiving) mode.
None
[ ENT ( SET/NAME )]
Enter the frequency
entry digit into the
VFO.
Activate the "Set" (Menu)
mode, or enable program-
ming of the Alpha/Numeric
name tag for the current
memory channel.
None
VR-500 O
PERATING
[ B.S ( B.W )]
Activate the Band
Scope feature.
Select the Band Scope
sweep width.
None
[ CLR ( P.SET )]
Cancel the frequency
entry or Menu mode
setting.
Toggle the operating
mode between the
" Preset Mode " and the
" Normal Mode ."
None
[ MONI ( LOCK )]
"Open" the squelch
manually
Activate "Key Lock"
feature.
None
M
ANUAL
Keypad Functions
Press Key
Temporary High Power
Press [ F/W ] +
Press [ F/W ] +
Key for 2
seconds
Disable the Noise and
Press Key
Activate the T. CALL.
Reverse the transmit
and receive frequen-
Press [ F/W ] +
Press [ F/W ] +
Key for 2
seconds
Illuminate the LCD and
Press Key
keypad for 5 seconds.
Activate the Spectrum
Press [ F/W ] +
Press [ F/W ] +
Illuminate the LCD and
Key for 2
keypad until you press
seconds
[ PTT ]
Transmit.
Transmit.
Transmit.
[ MON ]
USA version:
Tone Squelch.
European version:
cies while working
through a repeater.
None
[ L ]
AMP
Analyzer feature.
the key again.
5