Yaesu VR-500 Operating Manual page 39

Set Item 5 [Save]
Function:
Available Values: OFF/1:4(1sec)/1:12(3sec)/1:20(5sec)/1:2887sec)/1:36(9sec)
Default:
Note that the VR-500 receiving time is 250 ms when the Battery Save on.
Set Item 6 [OFF Timer]
Function:
Available Values: OFF/30/60/90 sec
Default:
Set Item 7 [ON Timer]
Function:
Available Values: OFF ~ 24:00
Default:
The ON timer turns on the radio at the programmed time (30 min/step ).
Note that this is not the time of day when the radio will turn on; it is the number of hours
and minutes until the radio turns on.
Set Item 8 [Scan Resume]
Function:
Available Values: 1sec ~ 12sec
Default:
This Set Item defines the length of time the scanner will hold on a frequency.
Set Item 9 [Contrast]
Function:
Available Values: 1/14 ~ 14/14
Default:
Set Item 10 [Key Beep]
Function:
Available Values: ON/OFF
Default:
Set Item 11 [LANGUAGE]
Function:
Available Values: ENGLISH (stationary value)
VR-500 O
PERATING
Select the Battery Save Interval ("sleep" ratio)
1:4(1sec)
Set the "Sleep Timer" Time
OFF
Set the ON Timer time
OFF
Set the Delay time for scan
5 sec
Setting of the Display Contrast Level
7/14
Enable/disable the Keypad Beeper
ON
Display the language for Set mode
M
ANUAL
Set Mode
37