Clearing Of A Memory Bank; Memory Channel Check - Yaesu VR-500 Operating Manual

This feature allows to mask (clear) the all memory channels in the desired memory bank at
the same time.
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key.
‚
Press the [ENT(SET)] key while pressing the [FUNC] key to activate the "Set" (Menu)
mode.
ƒ
Rotate the DIAL knob to select Menu #26 [Clear Bank].
„
Rotate the DIAL knob one click clockwise while pressing the
[FUNC] key to enable the setup of Memory Bank Clearing.
...
Key in the memory bank number (one digit) to be cleared
from the keypad.
†
The display will now indicate "Clear ..." for about four seconds. Thereafter, clearing
of the prescribed Memory Bank will be complete.
‡
Press the [CLR(P.SET)] key to exit to normal operation.
Important Note: A cleared Memory Bank can not be restored. All data for that bank will
have to be re-entered.
This feature allows you to view the number of Vacant Memory Channels in the each Memory
Bank (or all Memories).
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key.
‚
Press the [ENT(SET)] key while pressing the [FUNC] key to activate the "Set" (Menu)
mode.
ƒ
Rotate the DIAL knob to select Menu #29 [Vacant Memory].
„
Rotate the DIAL knob while pressing the [FUNC] key to re-
view the number of Vacant Memory Channels in the each
Memory Bank. The total number of available Memory Chan-
nels will also be displayed after the display of Bank #9's available space.
...
Press the [CLR(P.SET)] key to exit to normal operation.
VR-500 O
PERATING
C
LEARING OF A
M C
EMORY HANNEL
M
ANUAL
Memory Mode
M B
EMORY ANK
C
HECK
27