Yaesu VR-500 Operating Manual page 41

Set Item 19 [RF Squelch]
Function:
Available Values: OFF/1 ~ 9
Default:
Set Item 20 [Smart Search]
Function:
Available Values: 11/21/31/41 Channels
Default:
Set Item 21 [SSRCH Mode]
Function:
Available Values: SINGLE/CONTINUE
Default:
Set Item 22 [Flex Step]
Function:
Available Values: ON/OFF
Default:
VR-500 O
PERATING
Adjust the RF SQL threshold level
OFF
Select the Smart Search Memory Bank Size (# of channels)
31 Channels
Select the Smart Search operating mode
SINGLE: The VR-500 sweeps once in each direction starting on
the current frequency. All channels where activity is
present are loaded into the Smart Search memories.
Whether or not all memories are filled, the search stops
after one sweep in each direction.
CONTINUE: The VR-500 makes a sweep in each direction as with
the "SINGLE" mode, but if all channels not filled after
the first sweep, the VR-500 continues sweeping until
they all filled.
SINGLE
Enable/disable the "flexible" frequency step feature
OFF
OFF: When you change the receive mode, the channel steps remain
the same.
Example: With the radio on 14.0125 MHz (USB), change the receive
mode to NFM from LSB. Rotate the DIAL knob; the fre-
quency steps will be:
14.0125 è 14.1125 è 14.2125 è 14.3125 • • • (MHz)
ON: When you change the receive mode, the VFO frequency will
increment according to the current receive mode.
Example: With the radio on 14.0125 MHz (USB), change the receive
mode to NFM from USB. Rotate the DIAL knob; the fre-
quency steps will be:
14.0125 è 14.1000 è 14.2000 è 14.3000 • • • (MHz)
M
ANUAL
Set Mode
39