Memory Channel Copying; Memory Channel Swap - Yaesu VR-500 Operating Manual

This feature allows to copy and paste the Memory Channel data between any two desired
Memory Channels.
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key.
‚
Press the [ENT(SET/NAME)] key while pressing the [FUNC] key to activate the
"Set" (Menu) mode.
ƒ
Rotate the DIAL knob to select Menu #30 [Copy CH].
„
Rotate the DIAL knob one click clockwise while pressing
the [FUNC] key to enable the setup of Memory Channel
Copying.
...
Key in the Source Memory Channel number (three digits)
from the keypad, then key in the Destination Memory Chan-
nel number (three digits) from the keypad. Memory Chan-
nel Copying is now complete.
†
Press the [CLR(P.SET)] key to exit to normal operation.
This feature allows you to swap (exchange) Memory Channel data between any two Memory
Channels.
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key.
‚
Press the [ENT(SET/NAME)] key while pressing the [FUNC] key to activate the
"Set" (Menu) mode.
ƒ
Rotate the DIAL knob to select Menu #31 [Swap CH].
„
Rotate the DIAL knob one click clockwise while pressing the
[FUNC] key to enable the setup of Memory Channel Swap.
...
Key in the two Memory Channel numbers (each three digits)
to be swapped from the keypad.
†
Memory Channel Swap is now complete.
‡
Press the [CLR(P.SET)] key to exit to normal operation.
VR-500 O
PERATING
M C
EMORY HANNEL
M C
EMORY HANNEL
M
ANUAL
Memory Mode
C
OPYING
"Source" Memory
"Destination" Memory
S
WAP
25