Yaesu VR-500 Operating Manual page 43

Set Item 26 [Clear Bank]
Function:
Set Item 27 [Copy Bank]
Function:
Set Item 28 [Swap Banks]
Function:
VR-500 O
PERATING
Clear (mask) all the Memory Channels in a particular Memory Bank.
•
After selecting Set Item 26, rotate the DIAL knob one click clock-
wise while pressing the [FUNC] key to enable the Memory Bank
Clear function.
‚
Key in the Memory Bank number (one digit) to be cleared (masked)
from the keypad.
ƒ
You will see "Clear ..." on the display for a few seconds. The
selected Memory Bank is now cleared out.
„
Press the [ENT(SET)] key while pressing the [FUNC] key to exit
to normal operation.
Copy all Memory Channels in a particular Memory Bank and paste
them to another (different) Memory Bank.
To do this:
•
After selecting Set Item 27, rotate the DIAL knob one click clock-
wise while pressing the [FUNC] key to enable memory clearing.
‚
Key in the Source Memory Bank number, then key the Destina-
tion Memory Bank number (each one digit) from the keypad.
ƒ
Memory Bank Copy is now complete.
„
Press the [ENT(SET)] key while pressing the [FUNC] key to exit
to normal operation.
Swap the all Memory Channels in the desired Memory Bank.
To do this:
•
After selecting Set Item 28, rotate the DIAL knob one click clock-
wise while pressing the [FUNC] key to enable the Memory Bank
Swap.
‚
Key in the two Memory Bank numbers (one digit each) to be
swapped, using the keypad.
ƒ
Memory Bank Swap is now complete.
„
Press the [ENT(SET)] key while pressing the [FUNC] key to exit
to normal operation.
M
ANUAL
Set Mode
41