Yaesu VR-500 Operating Manual page 44

Set Mode
Set Item 29 [Vacant Memory]
Function:
Set Item 30 [Copy Channel]
Function:
Set Item 31 [Swap Channels]
Function:
Set Item 32 [Meter Symbol]
Function:
Available Values:
Default:
42
Display the nunber of vacant Memory Channels in each Memory Bank
(and total vacant Memories in all Banks.)
To do this:
•
After selecting Set Item 29, rotate the DIAL knob while pressing
the [FUNC] key to display the number of vacant memories.
‚
Press the [ENT(SET)] key while pressing the [FUNC] key to exit
to normal operation.
Copy and paste the desired memory channel
To do this:
•
After selecting Set Item 30, rotate the DIAL knob one click clock-
wise while pressing the [FUNC] key to enable the Memory Chan-
nel Copy.
‚
Key in the Source Memory Channel number (three digits) from
the keypad, then key in the Destination Memory Channel number
(three digits) from the keypad.
ƒ
Press the [ENT(SET)] key while pressing the [FUNC] key to exit
to the normal operation.
Swap the Memory Channel data between the desired Memories.
To do this:
•
After selecting Set Item 28, rotate the DIAL knob one click clock-
wise while pressing the [FUNC] key to enable the Memory Chan-
nel Swap.
‚
Key in the two Memory Channel number (each three digit) to be
swapped from the keypad.
ƒ
Memory Channel Swap is now complete.
„
Press the [ENT(SET)] key while pressing the [FUNC] key to exit
to normal operation.
Select the S meter symbol
n n n n
/ / >>>
n
n
n
n
n
VR-500 O
PERATING
M
ANUAL