Memory Recall - Yaesu VR-500 Operating Manual

Press [2 ABC] to enter "A" as the next character. Rotate the DIAL one click clock-
wise while holding in the [FUNC] key to move on to the next character.
Press [2 ABC] to enter "A" as the next character. Now rotate the DIAL two clicks
clockwise while holding in the [FUNC] key to insert a space and to move on to the
next character.
We now need to change from letters to numbers, so release the [FUNC] key, and
then rotate the DIAL one click so that "123" appears in the upper right-hand
corner of the display.
Press the [4 GHI] key to enter "4" as the next character. Rotate the DIAL one click
clockwise while holding in the [FUNC] key to move on to the next character.
Press the [5 JKL] key to enter "5" as the next character. Rotate the DIAL one click
clockwise while holding in the [FUNC] key to move on to the next character.
Press the [0] key to enter "0" as the final digit of the alpha-numeric label.
Press [ENT (SET/NAME)] to save the alpha-numeric information.
Finally, press and hold in the [FUNC] key; while holding it in, press [0] è [1] è
[0]. The display will indicate "010 Write!" momentarily, after which the display
will revert to 162.450 MHz, which is the current VFO frequency.
You still are operating in the VFO mode, and you may store other channel frequencies into
other memory channel registers in the same manner. To recall these memories, proceed to
the next section.
Recall of memorized channels is very simple:
•
Press the [1(MEMO)] key momentarily while pressing the
[FUNC] key. You may now release the [FUNC] key. "MR"
will appear in the bottom left-hand corner of the display, indi-
cating that you are now operating in the Memory Recall mode.
‚
Rotate the DIAL knob to select the desired memory channel, or enter the desired three-
digit memory channel number from the keypad.
To return to the VFO mode from the Memory mode, just press the [CLR (P.SET)] key.
"VFO" will appear in the bottom left-hand corner of the display.
VR-500 O
PERATING
M
EMORY
M
ANUAL
Memory Mode
R
ECALL
19