Yaesu VR-500 Operating Manual page 40

Set Mode
Set Item 12 [Search Mode]
Function:
Available Values: VFO/LIMIT
Default:
Set Item 13 [SRCH Memory]
Function:
Set Item 14 [Monitor]
Function:
Available Values: OFF/ON
Default:
Note that you can reduce the squelch on/off (pop) noise when this feature on.
Set Item 15 [Find Name]
Function:
Set Item 16 [Mode Scan]
Function:
Available Values: OFF/NFM/WFM/AM/USB/LSB/CW
Default:
Set Item 17 [Bank Scan]
Function:
Available Values: OFF/ON
Default:
Set Item 18 [Bank Link]
Function:
38
Select the VFO Scan Type
VFO: The VFO scanner activates the frequencies between the 0.1
MHz and 1300 MHz.
LIMIT: The VFO scanner activates the frequencies between the pre-
programmed frequencies.
VFO
Display the desired frequency pair from the "Search Band" Memory
•
Recall Set Item 13, then rotate the DIAL knob while pressing the
[FUNC] key.
‚
As you rotate the DIAL knob, the ten numbered "Search Band
Memory" numbers will be displayed, along with the frequencies
contained in those memories.
ƒ
Press the [CLR(P.SET)] key to return to the Menu item selection
mode.
Enable/disable the AF Power Amplifier when the squelch off.
OFF
Looking up a word in a memory tag
Select the Operating Mode for scanning
OFF
Enable/disable Memory Bank Scanning.
OFF
Set the Bank Link Feature
VR-500 O
PERATING
M
ANUAL