Operator Guide
Electrical safety
Printer
USA/Canada
Europe
DocuTech 65/DocuPrint 65
Attention to the following requirements ensures the safe operation of your
equipment.
The printer requires a 115V AC outlet, dedicated 20 Amp, 3-wire circuit.
The printer requires a 220-240V outlet, dedicated 13 Amp or 10 Amp circuit.
The equipment must be connected to a grounded mains outlet.
Ensure that the power connection for your printer satisfies these
requirements.
•
The power receptacle for the printer must meet the requirements stated
on the data plate on the rear of the printer.
•
The socket outlet shall be installed near the equipment within reach of the
10 ft. (3 m) cable and shall be easily accessible.
•
Use the power cable that is supplied with your printer and controller. Do
not use an extension cord, or remove or modify the power cord plug.
•
Plug the power cable directly into a correctly grounded electrical outlet. If
you are not sure whether or not an outlet is correctly grounded, consult a
qualified electrician.
•
Do not use an adapter to connect the printer to an electrical outlet that
lacks a ground connection terminal.
•
The power cord is the disconnect device for this printer.
•
Do not override or disable electrical or mechanical interlocks.
•
Do not push objects into slots or openings on the printer. Electrical shock
or fire may result.
•
Do not obstruct ventilation openings. These openings prevent
overheating of the printer.
CAUTION
Safety notes
xiii