Problem Solving; Avoiding The Problems - Xerox DocuPrint 65 Operator's Manual

Avoiding the problems

DocuTech 65/DocuPrint 65
4.

Problem solving

This chapter will assist you in avoiding problems and solving those that may
occur. It also provides information on how to contact the Welcome Center.
A variety of situations can affect the quality of the printer output. For optimal
performance, follow these guidelines:
• Do not locate the printer in direct sunlight or near a heat source such as a
radiator.
• Avoid sudden changes in the environment surrounding the printer. When
a change occurs, allow the printer at least two hours to adjust to its new
environment, depending on the extent of the change.
• Always set the Edge Guides in the trays to the size of the stock in the tray.
Otherwise, you may experience jams.
• Avoid dusty environments. Dust in the printer can cause paper handling
problems. Dust in either the printer or the controller can cause electrical
problems.
• Avoid placing routing cables where they may be stepped on or damaged,
or come in contact with liquids or sharp edges.
• Avoid placing routing cables where they could cause tripping hazards.
This is especially true when the controller is in the standard location, on
the floor.
• Locate the equipment in a properly lighted area to facilitate operation and
service.
4-1