Paper and other stock
Paper handling guidelines
This edge must be between 6.7 to 18 inches (170 to 457
mm) to be printed on both sides (duplexed).
3-2
Paper handling and/or image quality performance degradation might occur in
the following situations:
•
Lower quality paper
•
Extreme hot and humid or cold and dry environments
The size limitation for duplex printing is shown in Figure 3-1.
Figure 3-1. Size requirement for duplex printing
Feed Direction
The dimension of this
edge is controlled by the
tray.
DocuTech 65/DocuPrint 65
Operator Guide