Manual Feed Submenu; September - Xerox 8830 Operator's Manual

Manual Feed Submenu

Use this submenu to set the size and the title block location of the print
that has to be manually fed.
1. Go to the "Manual Feed" submenu.
in the Numeric Control Panel
u
U6
2. Enter the last level of the menu to set:
− "TITLE BLOCK LOCATION" [ u6.01 ]
Set the title block location. Press "Enter" to access the following
options:
− LOCATION 1 [ 01 ]
− LOCATION 2 [ 02 ]
− LOCATION 3 [ 03 ]
− LOCATION 4 [ 04 ]
− "STANDARD" [ U6.02 ]
Use this selection for standard sizes.
− "ROLL" [ U6.03 ]
Use this menu to set the roll width if the size is not standard.

September 2001

in the Alphanumeric Control Panel
OPERATOR
MANUAL FEED
− "LENGTH" [ U6.04 ]
If the size is not standard, it is possible
to set the length in this submenu.
− "AUTOLENGTH" [ U6.05 ]
Automatic length detection, future
option.
− Select FEED IN [ u6.06 ] to activate
the entry flap and to set the folder ready
to be Manual Feed.
− Select EXIT [ u6.00 ] to rise one level.
For a complete description of the
"Manual Feed" procedure, refer to the
next pages: "Manual Feed Procedure"
88XX Series Folder Operator Manual 23
Manual
feed
u 6
Title block
u 6.01
location
Standard
u 6.02
sizes
Roll
u 6.03
Length
u 6.04
Auto
u 6.05
length
Feed in
u 6.06
Exit
u 6.00