Xerox 8830 Operator's Manual page 35

− Choose Sort Bin to select where the folded print must be stacked.
The selection "default" lets the folder use the setting defined in
the Stacker Submenu, which is
With the selection "Bin #," the print will be delivered in the
specified bin. The ACT overrides the folder settings.
− Title Block. Inform the system where the title block is located in
the document.
The AccXES controller uses this information to orient the
document properly for the folder to obtain the correct output.
By using a document viewer application it is possible to identify
the right corner.
For example, with a standard ISO A0 document, the title block is
located in Lower Right corner in landscape orientation.
− Use the checkbox "Cross" to activate or bypass the cross folder.
− To activate the punching, choose a program with margin
(185+25, 190+20, 7.5+1) and tag the checkbox "Punch".
Untag the checkbox to deactivate punching.
Tagging the checkbox "Punch," with folding methods without
margin, does not activate the punching device.
− The "Margin" checkbox also does not affect the folder working.
The binding margin depends upon the Folding Method selected.
Select folding method 185+25, 190+20 or 7.5+1 to obtain a
folded print with the binding margin.
Untagging the checkbox "Margin," with any of these folding
methods, does not deactivate the margin.
4. Look to the Advanced Settings
bin usage, Face Up or Down, Punching , and Cross Programs.
5. Press the Submit icon to print and fold the documents of our job.
September 2001
in the folder control panel.
section for more details regarding
Mixed Document Job
In the previous paragraph, every document of the job has the same
orientation (LANDSCAPE/PORTRAIT) and same title block corner.
The next procedure shows, step by step, how to create a mixed
document job consisting of documents with different orientation.
1. Open AccXES Client Tools.
2. Insert the following documents:
− A1 ISO, A3 ISO, A2 ISO (Landscape Lower Right) and an A0
Afnor (Landscape Upper Rigth).
88XX Series Folder Operator Manual 34