Stacker Submenu - Xerox 8830 Operator's Manual

Folder
Hide thumbs Also See for 8830:
Table of Contents

Advertisement

Stacker Submenu

Use this submenu to define how the folder organizes the prints in the
output bins.
1. Go to the "Stacker" submenu.
in the Numeric Control Panel
u
U4
2. The default option is shown:
in the Numeric Control Panel
u 40 1
Lower right dot
3. Use the scroll keys to find the desired option and press "Enter" to
select it.
− "STACKER" [ U4.01 ]
The prints will be stacked in the first bin until it's full and then
will be directed to the second bin if available. When all the bins
are full, the folder stops the print queue. Once the prints are
removed the print queue restarts.
September 2001
in the Alphanumeric Control Panel
OPERATOR
STACKER
in the Alphanumeric Control Panel
STACKER
flashing
− "SORTER" [ u4.02]
The prints will be stacked alternately, one for each bin. The sorter
mode is a mechanical collation useful to print one job with more
copies and find them divided in more then one bin. When all the
bins are full, the folder stops the print queue. Once the prints are
removed the print queue restarts.
− "BIN 1" [ u4.03] "BIN 2" [ u4.04] "BIN 3" [ u4.05]
The prints will be stacked only in the selected bin, when this bin
is full, the folder stops the print queue. Once the prints are
removed, the print queue restarts.
− .SELECT EXIT [ u4.00 ] to rise one level.
If an option is not available, the code E-
14 "NOT AVAILABLE SELECTION"
will appear.
88XX Series Folder Operator Manual 21
Stacker
u 4
Stacker
u 4.01
Sorter
u 4.02
Bin 1
u 4.03
Bin 2
u 4.04
Bin 3
u 4.05
Exit
u 4.00

Advertisement

Table of Contents
loading

Table of Contents