Punching Submenu - Xerox 8830 Operator's Manual

Punching Submenu

Use this submenu to activate the punching system if it is available.
1. Go to the "Punching" submenu.
in the Numeric Control Panel
u
U5
2. The default option is shown.
in the Numeric Control Panel
u5 0 2
Lower right dot
3. Use the scroll key to select the desired option and press "Enter" to
select it.
4. Select EXIT [ u5.00 ] to rise one level.
September 2001
in the Alphanumeric Control Panel
OPERATOR
PUNCHING
in the Alphanumeric Control Panel
PUNCHING OFF
flashing
If an option is not available, code E-14 "NOT
SELECTION," will appear.
WARNING!
The punching device is available only with programs:
185 with margin 25mm
190 with margin 20mm
7.5 with margin 1"
WARNING!
The activation/deactivation of the punching by PC works only if
on the folder is selected the option "Punching On".
If the selection on the PC do not produce any effect on the
punching device, set "Punching on" on the folder control panel.
Punching
Punching
on
Punching
off
Exit
88XX Series Folder Operator Manual 22
AVAILABLE
u 5
u 5.01
u 5.02
u 5.00