Cross Programs Submenu - Xerox 8830 Operator's Manual

Cross Programs Submenu

Use this submenu to select the cross folding options.
1. Go to the "Cross Programs" submenu
in the Numeric Control Panel
u
U2
2. The default option is shown :
in the Numeric Control Panel
u 20 2
Lower right dot
3. Use the scroll key to select the desired option and press "Enter" to
select it.
With selecting "STANDARD" [ u2.01 ], for example,
an E size print (36"x48") with a program 8.5"x11" will
be folded with an output dimension 8.5"x11". The length
of each panel (b) is not equal.
September 2001
in the Alphanumeric Control Panel
OPERATOR
CROSS PROGRAMS
in the Alphanumeric Control Panel
STANDARD
flashing
11"
The same print could be folded with the same fan
program with the option "EQUAL" [ u2.02 ] because
the folder automatically divides the width of the print to
obtain equal panels.
The purpose of the "EQUAL" option is to obtain a folded print
more flat and folded with one less cross fold. That is why it does not
work with all sizes and styles. Only when a few millimeters of the
cross folding depth is modified, is it possible to obtain a folded print
without prefolds. The "EQUAL" option does not produce results
with Ericsson, Afnor, French and Wallets program (some of these
styles already have an output equal). Besides, it is possible to fold
equal panels only with some kind of paper rolls.
ROLL
914 (36")
900
864
610
Selecting "CROSS OFF" [ u2.03 ] will
bypass the Cross Folder. The print will be fan
folded only and stacked in the Rear Print
6-7"
Tray.
To activate the cross folder after a "Cross
Off" selection, select one of the two options:
"Standard" or "Equal".
4. Select EXIT [ u2.00 ] to rise one level.
UNI/DIN fold depth ANSI/ARCH fold depth
305
300
297
305
88XX Series Folder Operator Manual 19
11,3" - 12"
305
300
288
305
Cross
programs
u 2
Equal
u 2.01
Standard
u 2.02
Cross
u 2.03
off
Exit
u 2.00