E-Mail Environments; E-Mail Installation; Installation Procedure - Xerox WorkCentre 7232 System Administrator Manual

E-mail Environments

System Requirements
The following are required for the machine.
• Scan To E-mail Kit is required to send scanned documents as E-mail attachments.
• The machine is connected to the network using TCP/IP.
• The environment allows the sending and receiving of E-mail.
ITU-T Recommendations
E-mail forwarding
DSN function
MDN function
SMTP receiving
POP3 receiving
MIME version
NOTE: A file may not print if the format differs from those in the above table.
NOTE: It is recommended to use Microsoft Outlook Express 5.5/6.0 or Netscape 7 as
E-mail software.

E-mail Installation

This section describes how to enable the E-mail feature.

Installation Procedure

To use the E-mail feature, configure the following settings on the machine.
Network Communication Setup
NOTE: Some of the configuration options for this protocol are only available from
CentreWare Internet Services.
NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP
network.
Initially, activate the ports for E-mail.
1.
Connect the machine to the network.
Xerox WorkCentre 7232/7242 System Administration Guide
Item Correspondent Specifications
ITU-T T.37, T.30, F.185 and E.164
RFC2304, RFC2305
RFC1891, 1894
RFC2298
RFC821, 822, 1869
RFC1939
Version1.0 (RFC2049)
E-mail Environments
123