Adding A Group - Xerox Phaser 8560MFP User Manual

Adding a Group

Set up and save group names to easily access them when you want to send a fax to a group.
Groups can include both individual and group entries once they have been set up.
Note:
Individual entries must be set up before groups can be defined.
Using the Control Panel
Use the control panel to add or remove individuals or groups from the speed dial group.
Setting Up a Group
To set up a group:
1.
On the control panel, press the Speed Dial button.
2.
Select , and then press the OK button.
Group
3.
Select a blank number in the list displayed, and then press the OK button.
4.
Using the alphanumeric keypad, enter a group name, and then press the OK button.
5.
To add individuals to this group:
a.
Select
Add Individual
or more individuals can be added to this group.
b. Select an individual from the list displayed, and then press the OK button.
c. Repeat the above steps to continue adding individuals to the group.
6. To add a group to this group:
a. Select
Add Group
more groups can be added to this group.
b.
Select a group from the list displayed, and then press the OK button.
c. Repeat the above steps to continue adding groups to the group.
7. When you have finished adding individuals and other groups, select
the OK button.
Phaser® 8510/8560MFP Multifunction Product
Adding Individual and Group Speed Dial Entries
, and then press the OK button. This option appears when one
, and then press the OK button. This option appears when one or
6-8
, and then press
Done