Selecting Fax Options; Setting The Fax Destination - Xerox Phaser 8560MFP User Manual

Selecting Fax Options

This section includes:
■ Setting the Fax Destination
■ Setting the Fax Resolution
Selecting the Original Size
■
■ Selecting Auto Suppression
■ Selecting the Starting Rate
Delay Sending a Fax
■

Setting the Fax Destination

To set the destination for the current fax:
1.
On the control panel, press the Fax button.
2.
Select , and then press the OK button.
Fax To
3.
Select one of the following options, and then press the OK button:
■ : Enables you to enter a fax number or individual or group speed dial
Fax Number
directory number using the alphanumeric keypad.
■ Individual: Enter the number assigned to the individual in the individual
directory, and then press the Start button.
■ Group: Press the # button, enter the number assigned to the group in the group
directory, and then press the Start button.
: Enables you to select an individual or group entry.
■ Speed Dial
■ : Enables you to send the fax to a list of selected recipients.
Send List
Note: Press any key on the alphanumeric keypad to view the
See also:
Sending a Fax from the System
Adding an Individual
Adding a Group on page 6-8
Faxing Multiple Recipients Using Send List
Phaser® 8510/8560MFP Multifunction Product
on page 6-14
on page 6-15
on page 6-15
on page 6-15
on page 6-16
on page 6-16
on page 6-2
on page 6-6
on page 6-12
6-14
Selecting Fax Options
item.
Fax Number