Image Adjustments
You can change the following image adjustment settings:
■
Selecting an Original Size
■
Using the Prescan Glass Option
■
Reducing or Enlarging the Image
■
Lightening or Darkening the Image
■
Adjusting the Contrast of the Image
■
Automatically Suppressing Background Variations
Adjusting Scan Sensitivity to Laser Originals
■
■
Adjusting the Color Balance
■
Erasing the Edges of Copy Documents
Selecting an Original Size
When using the document feeder, or when using the document glass when the prescan glass
option is turned off, you can specify the size of the original so that the correct area is copied.
To specify the original size:
1.
On the control panel, press the Copy button.
2.
Select
Original Size
3.
Select one of the following options, and then press the OK button:
■
A paper size from the list displayed
■
Use Paper Supply Size
current paper supply.
Note:
The factory default is Use Paper Supply Size.
Phaser® 8510/8560MFP Multifunction Product
on page 4-8
on page 4-9
on page 4-9
on page 4-10
on page 4-10
on page 4-11
on page 4-12
, and then press the OK button.
: This option sets the copied area to the same size as the
4-8
Adjusting Copying Options
on page 4-10
on page 4-10