Loading the paper trays
28
Special paper stock
The bypass tray can hold a small stack of the following special
paper stock:
Transparencies
Labels
Use transparencies and labels specifically designed for copiers
(high temperature).
Note: The stack of special paper stock must be fanned before
loading it in the Bypass Tray.
Do not fill above the MAX line.
Procedure:
1. Open the bypass tray door.
2. Slide out the extension tray until you reach the desired
paper length.
3. Adjust the paper guide to the desired paper width.
4. Fan a small stack of the special paper stock before
loading it in the Bypass Tray.
5. Place the small stack of the special paper stock onto the
tray, along the paper guide, and then gently slide the
sheet into the copier until it stops.
XC23/XC33/XC33D User Guide