Table of Contents
Advertisement
XC23/XC33/XC33D User Guide
Normal copy mode
XC23/XC33 only
When the copier is switched on, the copier enters a warm-up
cycle and the Please wait icon becomes lit,
warm up cycle, the copier does not respond to the Start
button. Copying may begin when the Ready to copy icon
becomes lit,
normal copy mode.
XC33D only
When the copier is switched on, the copier enters a warm-up
cycle and the message "Please wait...Copier warming up"
appears on the message display.
During the warm up cycle, the copier does not respond to the
Start button. Copying may begin when the message "Ready
to Copy" appears on the message display; this message
indicates that the copier is in the normal copy mode.
Automatic Clear
This copier automatically returns to the normal copy mode
approximately sixty (60) seconds after a job is completed; the
automatic clear feature is enabled at the factory. The feature
can be deactivated by referring to the section entitled
Customizing your copier .
The automatic clear settings are preset at the factory and are as
follows:
Copy density
Reduce/enlarge
Paper supply
Copy quantity
Note: The factory default settings may be changed in order to
meet your specific copying needs. Refer to the section entitled
Customizing your copier for more information.
Getting to know your copier
, this icon indicates that the copier is in the
Auto
100%
Auto
1
. During the
19
Advertisement
Table of Contents
