Table of Contents
Advertisement
How to use the basic copying features
56
7. Remove the copies from the output device, and reorder
them so that the last copy is first and the first copy is
last: ...6, 4, 2.
Note: If your copy quantity is more than one copy, you
must reorder the copies as follows: 6, 6, 6..., 4, 4, 4...,
2, 2, 2... Ensure that all the last copies (6, 6, 6...) are on
the top of the stack.
8. Load the reordered copies into the same paper tray as
the one used in Step 4. The copies must be face up and
the bottom of the image must be placed toward the front
of the tray.
9. Place the odd-numbered originals (1, 3, 5...) in the ADF.
Ensure that the originals are face up and in the LEF
direction.
10. Select the paper tray which contains the reordered,
even-numbered copies.
11. Select the same copy quantity as you did in Step 5.
12. Press the Start button,
13. Remove your 2 sided copies from the output device.
.
XC23/XC33/XC33D User Guide
Advertisement
Table of Contents
